Top Slings stocks full range of masterlinks and masterlink assemblies that are intended to be placed in the hook of the crane as part of the wire rope sling ,chain sling and synthetic slling configuration. Our masterlinks comes in grade 80 or grade 100.

Common industry standard masterlink are forged, quenched and tempered, and meets to the performance requirement of EN 1677-4 and ASME B30.26. Masterlink with higher performance requirement are typically further type approved to DNV 2.7-1. We also stock AISI 316 (SS316) stainless steel masterlink for strong corrosion resistant requirement.

Top Slings stocks full range of shackles up to 300MT, consist of stainless steel shackles, anchor shackle (known as Dee shackle or chain shackle), bow shackle, wide body shackles and ROV shackles. The shackles comes in either screw pin or bow bolt and nut configuration.

Common industry standard shackles are hot dipped galvanised and conform to US federal specification RR-C-271F and ASME B30.26, whereas shackles with higher performance requirement are typically type approved and further conforms to DNV 2.7-1 and EN 13889. The stainless steel shackles comes in both AISI 304 (SS304) and AISI 316 (SS316) are also available.

We also stock ROV shackles that are designed for smooth and easy use in retrieving and releasing subsea lifting and rigging operation.

Top Slings stocks full range of swivels and hooks to meet different requirements, consisting of angular swivel, insulated swivel, clevis sling hook, eye sling hook, eye self-locking hook, swivel hook, ROV shank hook, grab hook, weld-on hook, choker hook, webbing hook, barrel hook, container hook, foundry hook, container lifting lug, stainless steel hook and eye grip safe locking hook. Safety latches of the hook can be ordered if required. The swivels and hooks comes in grade 80 and grade 100 of alloy steel, AISI 304 (SS304) and AISI 316 (SS316) of stainless steel.

Swivel comes in either ball bearing or brass bushing form. Ball bearing swivels allows full swivel underload whereas brass bushing is not intended to rotate under load and work as a positioning device. Yoke Insulated swivels are designed to protect the user during welding operations, tested to resist 1000 Volts. ROV Shank hooks is designed for deep sea underwater application, which is also available in our warehouse.

Feel free to contact us for more information.

Top Slings stocks turnbuckles with end fitting of eye, hook and jaw. Turnbuckles are designed to adjust tension slack in tensioning assembly. Our turnbuckle stock consists of commercial grade turnbuckles, industry standard turnbuckles and stainless steel turnbuckles.

Commercial grade turnbuckles are made of electric galvanised malleable steel, comes in either eye and hook or eye and eye termination configuration. It is mostly used in construction or light static load tensioning.

Industry standard turnbuckles are suitable for standard and heavy duty application. They are hot dipped galvanized and forged, where end fittings are quenched and tempered or normalized. All BST industry standard turnbuckles are equipped with lock nuts for safety purposes, and meets the performance requirements of Federal specification FF-T-791B and ASME B30.26.

We also stock AISI 304 (SS304) and AISI 316 (SS316) stainless steel turnbuckles and pipe turnbuckle to meet different customer requirement.